Scaffolding & shuttering on rent
Take the tonnage you need for as long as the programme needs it, and hand it back when the pour is done. No capital locked up in steel that sits idle between projects.
How hire works
A Guliani Group company · since 1991
Shuttering & scaffoldingyou can build on.
We manufacture and trade the full range — cuplock standards and ledgers, base and U jacks, adjustable props, shuttering plate, steel planks, tube and couplers — in new and sound used condition. Buy it, hire it, or sell us the stock sitting idle in your yard.
BuyNew manufacture and reconditioned stock, ex-yard or delivered.
RentHire by the month for the lift, the slab or the whole structure.
SellWe buy used shuttering and scaffolding. Tell us what you have.
What we do
Three ways to get the material you need
Most sites need a mix — buy the items you will use on every project, hire the ones you need for one slab, and clear out what you are finished with. RTL does all three, which means one yard, one delivery note and one person to call.
Buy new & reconditioned
Manufactured to the sizes in our catalogue, from ISI-marked pipe and finished in Oxford enamel — or sound used stock, inspected and repainted, at a fraction of new cost.
What we supply
Sell us your used material
Project finished? We buy used standards, ledgers, plate, props and couplers by the lot — valued on what it is, not what it was — and we arrange the lifting ourselves.
Get it valuedThe range
Built for the way Indian sites actually work
Every size in the catalogue, in the weights the crew expects — so a bay goes up the same way on the tenth floor as it did on the first.
Cuplock Standard / Vertical
The vertical member of the cuplock system, with a top and bottom cup set every half metre.
Ledger / Horizontal
The horizontal tie that drops into the cup and braces the standards into a bay.
MS Challi (Walkway Platform)
Welded steel walkway sections that give the crew a flat, non-slip working deck.
U Jack (U Head)
The adjustable head that cradles the primary beam and fine-tunes slab level.
Base Jack
The adjustable foot that spreads the load and levels the scaffold off uneven ground.
MS Adjustable Prop Jack
Telescopic props for slab and beam support, with your choice of head.
Why RTL
Steel that comes back up, lift after lift
Scaffolding is not a one-off purchase — it is an asset that gets struck, stacked, trucked and re-erected dozens of times. What matters is whether the cup still takes the blade cleanly after the fortieth cycle, and whether the thread on the jack still turns when it is full of slurry. That is what we build for, and what we inspect for when we take used material in.
- ISI-marked pipe on standards, ledgers and challi — the grade is on the tube, not just on the invoice.
- Oxford enamel finish in the blue you can recognise across a site, and that holds up to monsoon storage.
- Manufacturing and trading under one roof — if the size is not in stock, it is made, not substituted.
- New and used side by side, so you can spend where it matters and save where it does not.
- A skilled team who will tell you when you have over-ordered. It is cheaper for us to be honest than to take the material back.
On site
Our material, doing the work
Cuplock towers, shuttering runs and access decks on live projects — the same components listed on the products page, set out for the job in front of them.
Where it goes
From a single slab to a full structure
The same components, set out differently. Tell us the structure and we will tell you the tonnage.
High-rise & residential
Cuplock decking for slab after slab, with props and U heads taking the beam line.
Infrastructure & bridges
Heavy shoring towers, staging and formwork for decks, piers and abutments.
Industrial & warehousing
Long-span access, edge protection and maintenance scaffolds around plant.
Contractors & hirers
Fleet top-ups in bulk, and a standing buyer for the stock you are retiring.
How it works
Quote to site in four steps
Tell us the job
Slab area and floors, or a bill of quantities. A drawing helps, a phone call is fine.
We work the quantities
Sizes, piece counts and weights — for purchase, for hire, or a mix of both.
Loaded and dispatched
Checked against the list, loaded at our yard and sent to the site address.
Back or topped up
Extend the hire, add tonnage mid-programme, or hand it back at the end.
Tell us what the site needs.
Send the bill of quantities, a drawing, or just the slab area and the number of floors — we will come back with sizes, quantities and a price for purchase or for hire.